Skip to content
A white knitted sleeve worn on an arm, from above the elbow to the wristSample image

Private Label & OEM · Rainsville, Alabama

Arm & Leg Sleeves

Tubular knit sleeves developed for fit retention across sizing runs.

This page covers Runway Knitting's arm and leg sleeve programs: tubular knit sizing systems, graduated compression options, cuff treatments, and gripper bands, knit in Rainsville, Alabama. It is written for private label and OEM buyers who need fit retention held across a sizing run. Construction options, materials, program parameters, and the sampling pathway are set out below.

Two long white arm sleeves and two shorter white calf sleeves laid flatSample imageTwo white calf sleeves on leg formsSample image

Overview

Intended applications

  • Sports and recovery brands
  • Compression product lines
  • Outdoor and workwear brands
  • Team and club programs

A sleeve has no foot to anchor it, so everything depends on the sizing system and how the fabric recovers. We develop tubular constructions against limb measurement rather than generic S-XL, and specify cuff and gripper treatments so the sleeve stays where it is placed. Programs are private label and OEM only.

Options

Construction & customization options

6 options · swipe

01

Tubular knit sizing systems

Sizing built on limb circumference and length so fit stays consistent as the range scales.

02

Graduated compression options

Compression distributed along the sleeve where the program calls for a gradient rather than uniform pressure.

03

Cuff and finish treatments

Top and bottom finishes specified so edges hold shape and do not roll in wear.

04

Gripper bands

Gripper treatments to hold position, with placement and coverage matched to the end use. Which treatments apply to your program is confirmed at technical review.

05

Lengths

Arm, forearm, calf, and full-leg lengths developed against the activity and coverage intent.

06

Branding

Knitted-in logos, colorblocking, and size or side indicators developed with your artwork.

Rows of black yarn on a green machine frameA blue cone and white cones of yarn standing on a machine shelfGrey and blue cones of yarn above the knitting machines, with a white sock and a grey sock hanging below them
Rows of black yarn on a yarn machine · Yarn cones on a machine shelf · Yarn cones above socks hanging at the machines

Materials

Materials & functional choices

Sleeves are judged on how they hold position and how they feel after hours of wear, and both trace back to the yarn system.

Nylon and poly face yarns
Selected for abrasion resistance, hand, and how the fabric drapes on the limb.
Elastic systems
Spandex content and feed method specified for grip and recovery over the wear cycle.
Moisture behavior
Yarn systems chosen for wear duration, since a full-shift workwear sleeve differs from a recovery sleeve.
Finishing
Boarding and finishing set the finished dimensions that fit and compression are measured against.
Cones of grey, yellow and black yarn hanging from overhead racks
Yarn cones on the overhead racks that feed the knitting machines

Process

Manufacturing process for this product

  1. Feasibility

    We review the end use, sizing intent, and compression target against our capability.

  2. Yarn and gauge

    Face yarn, elastic system, and gauge are selected for the fit and hand you need.

  3. Knit development

    Tube dimensions, gradient zones, and cuff treatments are specified and knit.

  4. Sampling

    Samples are produced across sizes so fit retention can be evaluated on the limb.

  5. Approval

    Knit spec, finished dimensions, gripper placement, and packaging are locked with your team.

  6. Production

    The approved spec runs on the knitting floor, where its samples were knit.

Specifications

Typical program parameters

Figures are program-specific and depend on construction, yarn availability, and packaging. Confirmed lead times and sample timing are published here once finalized.

Arm & Leg Sleeves: program specifications

Arm & Leg Sleeves: program specifications
ParameterDetail
Customization surfacesKnit-in logos and cuff branding developed from your artwork; packaging and labeling format specified per program.
SizingTubular knit sizing systems and lengths developed per program, sampled across sizes on the limb.
Minimum orderSet per program during development; depends on construction, size run, colorways, yarn and price
Development samples and production lead timePublished after program review.
Program typesPrivate Label & OEM
Primary inputs neededEnd use, arm or leg placement, sizing and measurement system, compression intent, cuff and gripper preferences, artwork, packaging requirements
Origin statusKnit in Rainsville, Alabama; yarn origin confirmed in writing per program

Sampling & development pathway

Development & quality

White, black, grey and blue spools of yarn stacked on a red cart

Spools of yarn on a cart on the mill floor

  1. Program review

    We start from the end use and whether the sleeve carries compression, since that shapes the whole construction.

  2. Sizing system

    The measurement system is defined first: a sleeve range fails when sizing is designed after the fabric.

  3. Sample rounds

    Samples are produced across sizes for fit and slip evaluation. Revision rounds depend on how far the first sample sits from intent.

  4. Wear and wash review

    You evaluate fit retention and recovery under your own conditions before the spec is approved.

  5. Approval and handoff

    The approved sample becomes the reference for production and every replenishment run afterward.

  • Finished dimensions verified against the approved sample across every size.
  • Fit retention and recovery checked on finished sleeves rather than on fabric alone.
  • Gripper band placement checked against the approved sample where the program includes them.
  • Cuff and edge condition inspected across sizes.
  • Color and artwork placement compared to the approved reference.
  • Packaging and labeling verified against the program record before shipment.

FAQs

Arm & Leg Sleeves questions

Minimums are set per program during development and depend on the construction, size run, colorways, yarn and price; ask for them in the RFQ. Programs that run sleeves alongside a matching compression sock are reviewed together. Graduated profile, length, and gripper band treatment are construction decisions settled in development. Technical review confirms packaging, labeling, documentation requirements where the program carries them, and the replenishment pattern. Send the limb measurements, size run, and colorway count through an RFQ.

Yes. Compression can be distributed along the sleeve so the gradient follows the profile your program defines, using the same development approach as our compression sock programs. The achievable profile depends on the yarn system, the gauge, and the sizing range, and it is verified by measuring finished product rather than assumed from the machine setting, because boarding and finishing both affect the dimensions the profile is measured against. We do not publish target ranges here, since the meaningful figure is the one measured on your construction at each size rather than a generic band. In development we knit samples across the range and confirm the gradient holds at the extremes, not only in the middle size where most constructions behave. Bring your target profile and sizing system into an RFQ and we will confirm what we can hold for your program.

We build sizing on limb circumference and length rather than generic apparel sizes, because a sleeve has no foot to anchor it and will slip if the size steps are wrong. The measurement system is defined and written down before sampling, so every later decision is made against the same reference. Samples are then produced across the range and fit is evaluated at the extremes rather than only in the middle size, since that is where sizing systems fail. Where the program carries compression, we confirm the profile holds at each size instead of extrapolating from the sample size. Adjustments happen at the sizing level, changing the steps or the finished dimensions, not by stretching one construction to cover more bodies. The approved size set becomes part of the program record that production and replenishment are measured against.

Yes, and running them together is usually the cleaner path. We match the color reference and, where the construction allows, the yarn system, so the two articles read as one family on shelf and in use. Development still happens per article, because a tubular sleeve and a shaped sock are different constructions with different fit logic, but the specs are held under one program record and colors are held to the same approved reference. That keeps the family consistent through replenishment rather than letting the two articles drift apart across separate approvals. It also simplifies scheduling, since both articles move through the same review and approval cycle. Tell us in the RFQ if a sleeve program pairs with socks, or with wristbands and sweatbands, so we scope everything together from the first conversation.
Two rows of knitting machines along an aisle, with cones of yarn hanging overhead

Request for quotation

Start an arm & leg sleeves program.

Send the end use, target construction, size run, and artwork. We review feasibility first and come back with the parameters that apply to your program.

Start an RFQ

Pre-set to Arm & Leg Sleeves · Private label and OEM only