Skip to content
A pair of grey ankle socks, one turned over to show rows of grip dots under the footSample image

Private Label & OEM · Rainsville, Alabama

Grip Socks

Custom grip socks knit in Rainsville, Alabama: studio, sport, and hospital programs.

This page covers Runway Knitting's custom grip sock programs: sock construction knit in Rainsville, Alabama, with the grip pattern matched to the end use and laundering cycle. It is written for private label and OEM buyers developing studio, sport, and hospital programs at wholesale volumes. Construction options, grip layouts, materials, program parameters, and quality checks are set out below.

The sole of a grey grip sock, with rows of raised grip dots from toe to heelSample image

Overview

Intended applications

  • Pilates and barre studios
  • Soccer and field sport
  • Hospital and fall-prevention programs
  • Trampoline parks

Grip socks are a knit construction plus an applied grip pattern, and the two have to be specified together. We develop the sock body (height, cushioning, and support) and then match grip material, pattern layout, and coverage to how the product will actually be worn and laundered. Programs are private label and OEM only.

Options

Construction & customization options

6 options · swipe

01

Heights

Crew, quarter, and ankle heights, selected against the end use and how the sock sits in footwear or on a bare foot.

02

Cushioning zones

Terry cushioning placed where the program needs it: full-foot, forefoot and heel, or none for a thinner studio hand.

03

Arch support bands

Knitted arch bands specified by tension and width so hold is consistent across the size run.

04

Toe seam options

Toe closure selected for comfort and irritation profile, which matters most on barefoot and patient-wear programs. We offer seamless toe closures, closed on the machine stitch by stitch.

05

Branding

Knitted-in logos, cuff and welt treatments, and color placement developed with your artwork.

06

Size run

Sizing developed for the wearer population, including single-size hospital constructions where appropriate.

Cones of grey, yellow and black yarn hanging from overhead racksA grey sock with black stripes hanging at a knitting machine, beside its control panelWhite, black and grey spools of yarn standing together on a cart
Yarn cones on the overhead racks that feed the knitting machines · A striped sock hanging at its knitting machine · Spools of yarn standing on a cart

Materials

Materials & grip application

Grip is an applied material, so the yarn choice, the grip material, and the laundering cycle have to be considered as one system.

Grip material
Grip material is selected against the wear surface, the required tack level, and how the product is cleaned. Which materials apply to your program is confirmed at technical review.
Custom pattern layouts
Dot fields, geometric grids, brand marks, and full-coverage layouts can be developed from your artwork.
Grip placement
Coverage is matched to the use case: forefoot and heel for studio work, broader sole coverage for fall-prevention wear, and targeted zones for sport.
Yarn selection
Cotton, poly, nylon, and spandex blends specified for hand, moisture behavior, and recovery across repeat wash cycles.
A machine with a row of blue tension units, white and blue yarn packages, and safety signs on its side panel
Yarn running through a row of tension units

Process

Manufacturing process for this product

  1. Feasibility

    We review the sock construction, grip intent, and end use at program review.

  2. Knit development

    Height, cushioning, arch band, and toe closure are specified and knit as a body.

  3. Grip layout

    Pattern, material, and coverage are set against your artwork and laundering conditions.

  4. Sampling

    Samples are produced so grip feel, tack, and sock fit can be evaluated together.

  5. Approval

    The knit spec, grip layout, packaging, and tolerances are locked with your team.

  6. Production

    The approved spec runs on the knitting floor, where its samples were knit.

Specifications

Typical program parameters

Figures are program-specific and depend on construction, yarn availability, and packaging. Confirmed lead times and sample timing are published here once finalized.

Grip Socks: program specifications

Grip Socks: program specifications
ParameterDetail
Customization surfacesCustom grip pattern layouts and placement, plus knit-in logos and cuff branding developed from your artwork.
SizingSize run developed with your program, with grip layout scaled and sampled across sizes.
Minimum orderSet per program during development; depends on construction, size run, colorways, yarn and price
Development samples and production lead timePublished after program review.
Program typesPrivate Label & OEM
Primary inputs neededEnd use, target sock height and cushioning, grip pattern or layout intent, size run, laundering conditions, packaging requirements
Origin statusKnit in Rainsville, Alabama; yarn origin confirmed in writing per program

Sampling & development pathway

Development & quality

Black yarn cones and blue foot-shaped forms on a red workbench

Foot forms and yarn on a QC room bench

  1. Program review

    We start from the end use rather than a catalog item, and confirm which construction and grip material fit before quoting.

  2. Spec definition

    Sock body and grip pattern are agreed together, so the sample and the production run reference the same approved sample.

  3. Sample rounds

    Samples are produced for fit, hand, and grip evaluation. Revision rounds depend on how far the first sample sits from intent.

  4. Wear and wash review

    You evaluate grip behavior under your own laundering conditions before the spec is approved.

  5. Approval and handoff

    The approved sample becomes the reference for production and every replenishment run afterward.

  • Grip placement and registration checked against the approved sample layout.
  • Grip adhesion checked against the approved sample.
  • Sock dimensions and cuff tension verified across the size run.
  • Toe closure and seam condition inspected on barefoot and patient-wear constructions.
  • Color and artwork placement compared to the approved reference.
  • Packaging and labeling verified against the program record before shipment.

FAQs

Grip Socks questions

Runway Knitting, Inc. manufactures grip socks in Rainsville, Alabama. We are a private label and OEM manufacturer only, which means we make grip socks to your specification and under your label rather than selling a product of our own. The socks are knit in Rainsville, Alabama, with yarn origin confirmed in writing for each program. The sock body and the grip pattern are developed and sampled as one program rather than as two separate decisions. That matters on grip socks specifically, because the knit construction and the applied grip interact: cushioning, yarn choice, and grip material all affect how the finished product feels and how it holds up in the wash. We have been in business for 33 years, and grip programs are sampled on machines on the knitting floor, so a sample and a production run behave alike. If you are sourcing grip socks domestically, start an RFQ with the end use and size run.

Yes. Custom grip socks can carry your logo both in the knit and in the grip pattern itself. Branding can be knitted into the sock through logo placement, cuff and welt treatments, and color blocking developed from your artwork, and your mark can also be worked into the grip layout on the sole where it reads as part of the pattern. Before development begins we review supplied artwork for feasibility against the knitting and grip application processes. Some marks need adjustment (element size, spacing, edge distance from the sock perimeter, or stitch-level detail) so they reproduce consistently across the size run instead of only at one size. We tell you what needs to change and why before you commit to a spec, and the adjusted artwork becomes part of the approved reference. Bring your logo files and intended placement into an RFQ and we will review them as part of the program.

We manufacture grip socks to your label at program volume, but we do not sell finished stock for resale. There is a real difference between the two: a wholesaler sells you their existing product to resell, while we produce a construction you specify, under your brand, as your own product. That means there is no catalog to order from and no in-stock inventory to ship: every run starts from a spec developed with you and approved before production. Volume is handled as a program rather than an order. Minimums are set per program during development and depend on the construction, size run, colorways, yarn and price; ask for them in the RFQ. Replenishment runs afterward reference the same approved sample. If you need grip socks at wholesale quantities under your own brand, start an RFQ describing the product, the end use, and the volume you have in mind.

Minimums are set per program during development and depend on the construction, size run, colorways, yarn and price; ask for them in the RFQ. Technical review confirms the grip material and pattern as sampled, packaging format, laundering expectations, and the replenishment pattern. Send the end use, size run, and colorway count through an RFQ.

Yes. Customer-supplied grip artwork is normal, and we build the grip layout from it. Before development starts we review the artwork for feasibility against the grip application process, because not every layout that looks right on screen reproduces reliably on a knit surface. Common adjustments are spacing between elements, edge distance from the sock perimeter so grip does not run off the intended zone, and minimum element size so small details reproduce reliably across the size run. We tell you what needs to change and why before you commit to a spec, so the pattern you approve is the pattern that can actually be produced consistently across the size run. Coverage is also matched to the end use at this stage, since the same artwork may need different placement for studio wear than for hard-floor use. Bring your pattern files into an RFQ and we will review them as part of feasibility.

Grip durability depends on the grip material, the coverage, and the wash and dry conditions the product will see, so it has to be specified up front rather than assumed. Commercial laundering is harder on applied grip than home washing, and high-heat drying in particular is the condition that tends to separate a grip layout that lasts from one that degrades early. Because of that, we treat the laundering cycle as a development input alongside the knit construction and the grip pattern. If your program runs through a commercial or institutional laundry, tell us the cycle (temperature, chemistry, and dry conditions), and we will develop against it and select the grip material and coverage accordingly. You then evaluate samples under your own laundering conditions before the spec is approved, so the decision is based on your process rather than a general claim. The approved sample becomes the reference for production.

The difference is what the grip has to do and what the sock has to survive. Studio programs (Pilates, barre, and similar) generally prioritize feel, brand appearance, and grip on wood or mat surfaces, which usually means lighter coverage, a softer hand, and a construction where the sock reads as part of the brand. Hospital and fall-prevention programs prioritize traction on hard flooring and consistent performance through institutional laundering, which usually means broader sole coverage and a more durable construction. Sizing and labeling expectations differ as well: studio programs typically run a full retail size range with retail packaging, while institutional programs may run fewer sizes with bulk packaging and program-specific labeling. Toe closure and seam choices also matter more on barefoot and patient-wear constructions. We develop the grip layout against whichever program you are running rather than applying one pattern to both, so tell us the end use in the RFQ.

Yes. Grip socks are produced under your brand from the sock itself through the finished pack. Branding can be knit into the sock, and packaging and labeling format is specified per program and confirmed at program review, including bulk formats for institutional and program buyers who do not need retail presentation. Because we work private label and OEM only, the product carries your name rather than ours. Packaging and labeling requirements are locked at the approval stage along with the knit spec and the grip layout, so the pack format is part of the program record rather than something decided after production. A product's origin label must reflect where it was knit and where its yarn was made, so final wording and placement are confirmed for each program before production. Bring your artwork, label copy, and intended pack format into an RFQ so packaging is part of the program from the start.
Two rows of knitting machines along an aisle, with cones of yarn hanging overhead

Request for quotation

Start a grip socks program.

Send the end use, target construction, size run, and artwork. We review feasibility first and come back with the parameters that apply to your program.

Start an RFQ

Pre-set to Grip Socks · Private label and OEM only